There are details…and then there are DETAILS. This beauty came to us from an owner in Gilbert,Arizona. After setting up a time to take a look at the car and the condition as well as get an idea of what all the owner wanted to have done…we came to the conclusion that this owner wanted well…everything.
On the list of services for this baby would be:
Full nose paint protection film aka “clear bra” (front clip, full hood, full fenders, mirrors and behind those fat rear wheels)
Full paint correction (removal of all swirls, scratches and paint defects)
CQuartz Finest paint coating (with 2 year warranty of course)
Full interior detail with CQuartz Fabric and CQuartz Leather coating application
CQuartz Dlux on exterior plastic
Full wheels pulled detail (wheels removed, decontaminated, coated front and back, wheel calipers coated and wheel wells detailed)
“DODGE” badging taken off of the back
This was lining up for one great detail…so, let the games begin
The FIRST THING we came across was pretty disturbing on a brand new Hellcat. Tons of glue behind the paper plates, this was fun to clean up.
Yup yup…gotta love that!  Next up was to chemically decontaminate the paint of all bonded iron particles (rail dust, brake dust, fallout etc) All the purple you see is the chemical reacting to the iron particulates, safely dissolving them off of the paint.
Then of course, she was given a nice foam bath
Lastly we finished the decontamination process by clay barring the entire exterior – just incase anything was missed. In our case we use a decontaminate block (or sponge).

Next up, she was pulled into the garage where Dani and I would split up to tackle two tasks at once. I would begin working on removing these monster matte wheels to get them prepped for CQuartz Finest coating while she was busy doing an interior cleaning to prep for CQuartz Leather and CQuartz Fabric coatings.
I love pulling wheels because it gives the detail that finished look. While ALMOST all dirt and grime can be cleaned with wheels on…its just so much more complete by pulling them so that you can get to all this
he tire on both the front and back would be cleaned and the matte would also be carefully chemically decontaminated:
Yeah, yuck.
Brown tires are my nemesis…i hate brown tires:
Once completely cleaned both the front and back of the tire was dressed with CarPro’s PERL at 2:1 ratio…2 coats
Then the wheel faces were cleaned with Eraser, making sure the surface was completely free of anything that would hinder CQuartz Finest from bonding properly to the surface. Finally it was time to coat:

Ah yes, thats how they should look!
Dani in the mean time was working her magic on the inside;

Being that the seats were two different materials (part fabric part leather), she had to use the appropriate coating for each section. Its great having the interior coated while the car is NEW. It really helps to preserve the appearance and greatly reduces the risk of an accidental spill creating a bigger problem. Plus out in Arizona, having the extreme UV protection of the leather coating is always a smart thing to do. Not to mention clean up only requires a damp microfiber cloth.
I was back working on the wheel wells and calipers:

Day one was quite long, but we accomplished a lot.
The next day and a half we would be doing the paint correction and then applying Finest to the exterior…as well as doing an engine bay detail, sealing the door jambs and doing any final touch ups that were required.
White is a difficult color to capture defects on camera..but you can still see the scratches that were visible in direct light
Then of course…time for the star of the show, CQuartz Finest…to lock in that perfect paint and add some serious gloss and protection. First we had to do an Eraser wipe down…again, making sure there is no polishing oils of any sort left on the paint that could interfere with the coating bonding correctly:

Thanks everyone for taking the time to read…hope you enjoyed as always.